Some major delays in getting my arcade finished, but I was able to get some work done over the Thanksgiving weekend. I finished drilling all the holes in the Lexan cover... then I had to route out some small square areas for the joystick and trackball brackets to fit in - they're now flush with the surface of the wood (sunk down about 1/16" to 1/8") - finally I drilled out the areas where the joy and trackball hardware will fit up under the control panel and connect to the brackets.
Up next, I need to paint the CP black, mount the CP overlay graphic, and then connect all the hardware. I'm close to having this thing done. The PC is ready and all the games are installed...
No comments:
Post a Comment