Monday, December 31, 2007

Painting and T-molding done


Well, I didn't get to do much during the Christmas break, but New Year's Eve was productive.

Today I was able to get the t-molding on... what a pain. But it does look nice. t-molding.com was able to get me two matching rolls of Galaxian Green (the previous 2 rolls sent to me were slightly different) and I lucked out in that they are almost an exact paint match to the sides.

I also got the GGG LED bar installed and it is BRIGHT! My only complaint is the 3" of wire they give you and it's very thin gauge... but I can work with it. I had a 12V harness from another project (8 AA batteries) that I was able to hook up to it and test it out with the marquee in place.

Tomorrow, weather/wife permitting, I plan on getting the Luminglas mounted in the front hole, wire up the speakers, mount the marquee (picked up the L-shaped molding from Home Depot and need to spray paint black), and mount the SmartStrip inside the cab.

I'm debating working on the bezel first or jumping straight to the CP. I have to admit the CP has me a little frazzled as I'm not good with electronics or drilling straight/vertical holes. That said, if I ever want to play this thing, I'm going to have to do it sooner or later...

Happy New Year, all!

Jim

Tuesday, December 18, 2007

First coat of black paint on...


First black coat of paint is on... very thin, though. The foam roller still doesn't put much on the surface on the first coat... not really even the 2nd. It took 3 coats of the green before I started noticing a consistent color... an additional 2 coats before I was happy with it.


In the pic you can see the front of the cab with the circle cut out - that's where the green 12" Luminglas circle will be mounted... speaker panel is also being painted and to the right of the cabinet. I drilled some air holes in a nice little pattern on the top angled piece and you can see some blue tape on the back of the cab - that's a hole I cut out so I could access the monitor controls if necessary. I'm going to mount another speaker grille over it and it'll look fine.


I'm hoping to have the black coat completely done by this Saturday so I can put on the t-molding. After that, I'm going to mount the Luminglas, speakers, marquee, and get a monitor bezel completed. Then it'll just be the CP and PC.

Sunday, December 9, 2007

First 2 coats on the sides



This will be a two-tone cab, so I decided to start with the sides first - everything else will be black.



I'm using foam rollers which are working great BUT... I didn't realize the first coat would be so thin. The foam rollers definitely don't coat like a normal "fuzzy" roller for painting walls and such. After the first coat dried, I put on a second coat and the color really came out nice. I realize now that after sanding, it will probably take numerous coats to get the consistent color and smoothness. I'm not going for glass-finish, just smooth with no jaggies. (Definitely recommending the foam roller treatment to anyone preparing for this portion - the application looks nice and it doesn't have that textured look using 'fuzzy' rollers or brushes.)